LED fluorescent power

Manufacturer

Yili LED Drive Power Co., LTD

8-20W LED fluorescent lamp non isolated power supply YL-RF820B

36-80V 230mA built-in non isolated LED fluorescent lamp driving power, this series of products are designed for driving board with built-in LED fluorescent lamp powersupply design, application fields: bulb lamp, fluorescent lamp,high safety! Long service life, small volume, no stroboscopic, emerald 5000H electrolysis, Jing Feng BP2632A, built-in 2AMOS tube, EE10/EE13 transformer, high performance, high efficiency, convenient installation, exquisite workmanship,and supporting the use of various specifications of light; strong carrying capacity, to adapt to the lamp panel of different specifications, is built in LED industry the price is relatively high and constant current driving power supply.

Product name:
8-20W LED fluorescent lamp non isolated power supply YL-RF820B
input voltage:AC175-265V
Conversion efficiency:≥90%    
Protection characteristics:Output overload/output overvoltage/short/over temperature
The product model:YL-F618C    
The output voltage:YL-RF820B
Power factor:≥0.9
Output power:8-20W
Output current:230mA
Size and shape:180mm*15mm*8mm
Service life:≥30000h

Product Features:
Universal AC input 175-265V AC range
Characteristics: 
short circuit protection/load/overload/overvoltage
Jing Feng PB2832A,built-in 2AMO tube
Emerald 5000 hours electrolysis,no stroboscopic
High accuracy high price of small volume
100% full load burn-in test

Note:
1.All parameters NOT specially mentioned are measured at 230VAC input, rated and 25℃ of ambient temperature.
2.The Accuracy is the total Accuracy which Comprises the Line Regulation ,Load Regulation and Error.
3.Constant Current Mode Can Apply Only to the LED and relevant industry.
4.Ripple & Noise are measured at 20MHz of bandwidth by using a 300mm twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.

Instructions for use:
This product at both ends, one end is the AC input terminal, wherein one end is the input"N"end;the other end is"L"end of input. The other end of the DC output, DC output is negative, then "LED-"; the other end is connected with the DC output positive,"LED+".
1:the device power, please pay attention to the input, output the correct mounting;
2:in order to avoid the LED burn, please connect the DC output drive power;
3:when using this product please note the high security, and good anti shock measures.

The abnormal phenomenon and the corresponding treatment methods:
1.the power supply in the first device electrical connection, such as not bright or other corresponding phenomenon,please cut off the input AC and check the DC output has no bad contact or AC input has no bad contact;
2.in the device electrical connection, and the LED lamp is lit, but the output is abnormal, please cut off the input end of the AC check the DC output has no overload,
overload;
3.the product in the use of process in case of any questions or solve problems please communicate with our,feedback information,so as to enable us to provide more quality products and services.

(this article by the Yili photoelectric LED panel lamp power supplier consolidation share) billion force recommended: LED bulb lamp power supply.