Electronic Ballast Tester 
| Manufacturer |
Lisun Electronics Inc. |
|
|
Specification:
UI5000 is the updated version of UI3000 with super-big LCD for displaying waveforms and parameters directly, it includes all the functions and technical parameters of UI3000. Reports can be printed if printer connected. It also meets the latest requirements for electronic ballasts in international standards IEC60929, IEC60969, IEC61000-3-2, GB/T15144-2005, GB/T17263-1998.
• UI5000 has expanding analysis for envelope wave.
• Measure parameter:
1) Input: Vrms, Lrms, W, PF, Hz, Phasic angle, total harmonic and 0-39 component of harmonic.
2) Output: Lamp voltage, Lamp current, Filament current, Guided cathodic current, Lamp power, crest factor and oscillatory frequency, single high frequency analysis.
• Startup lamp voltage, lamp current, filament current, guided cathodic current curve and parameter, preheating time.
• Simultaneously display on 8 windows for input and output parameters, convenient for comparing and analysis.
• Test preheat energy, filament preheat time. And the parameters changes from 0 to 5s of filament voltage, filament current and filament power.
• Up to 1MHz lrms test content to every EB.
• Analysis symmetry of high Frequency curve of lout.
• 12-bit high-speed A/D, sampling rate up to 10MHz,can easily analysis signal curve of output.
• Finish a input and output testing at the same time within 1 minute.
• Portable, can test , display, print without computer, test report include data and curve, comply with international standard.
• Communication port for PC, run under Windows2000 or Windows XP.
