Power Integrations Releases 150 W LED-Driver Design

Power Integrations has released a reference design kit for a 150 W, 48 V power supply for LED streetlights and other industrial/infrastructure lighting systems.

The driver circuit described in RDR-292 is more than 93% efficient at 230 VAC input and above 91% at 110 VAC. The design delivers a system power factor of greater than 0.97, THD of less than 10%, and easily meets EN61000-3-2 C. Designs can be scaled from 75 W to 400 W, using the same platform, simply by choosing different HiperPFS™ (PFC) and HiperLCS™ (LLC) family members and sizing power components appropriately.

RDK-292 requires fewer than 125 components to implement the driver’s PFC, LLC and standby power supply circuits, resulting in low BOM cost and exceptional reliability. The design utilizes a combination of Power Integrations’ highly integrated HiperPFS power-factor-correction IC and the HiperLCS resonant converter IC, which together save up to 35 components compared with conventional LLC solutions. HiperLCS also permits the use of smaller magnetics and output filter capacitors than typical LLC designs. The design incorporates a Qspeed™ merged PIN-Schottky diode as well, boosting CCM PFC efficiency by delivering greatly reduced diode recovery losses when compared with conventional ultrafast silicon PFC diodes.

For installations with remote lighting-control systems, the design implements highly efficient standby power-supply functionality based on Power Integrations’ LinkSwitch™-TN ICs. The addition of a CAPZero™ X-capacitor discharge IC delivers further power savings, reducing no-load consumption to around 800 mW at 264 VAC input.

RDK-292 contains specification, schematic, BOM, transformer documentation, PCB layout, and performance data. RDK-292and RDR-292 are available now on the Power Integrations website.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<

Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.