Andy Zhou Launches Flexible OLED Luminaire Plus Pendant

Australian designer Andy Zhou, a fresh 2013 graduate of Bachelors of Industrial Design at Monash University has introduced a flexible OLED luminaire that can be programmed to flex and display various lighting patterns. Below is a detailed introduction of the OLED luminaire from Zhou’s website:

Andy Zhou, Plus Pendant
The OLED luminaire Plus Pendant. A woman looks up at the pendant flexing downwards. Please click on photo to see the lights in action.  (Photo Courtesy of Andy Zhou) 

The Plus Pendant is an OLED luminaire designed to showcase the current and future capabilities of organic light emitting diode technology.  As a thin, surface based light source, OLEDs can be used by industrial designers in revolutionary new ways. It uses 36 rigid OLED panels to emulate future capabilities of organic technology such as its razor thin profile and flexibility.

Close up of the OLED panels and fabric cover. (Photo Courtesy of Andy Zhou)

The fabric cover is manufactured by a process called 3D CNC Knitting.This process uses white polyester and grey wool thread to create a seamless textile in a single piece.

Timber components found on the central column are century-old recycled timber, sourced from the original Princes Pier in Port Melbourne, Australia.

The OLED luminaire Plus Pendant. A woman looks up at the pendant as it flexes upwards.(Photo Courtesy of Andy Zhou) 

The OLED frame flexes up and down to change the characteristics of the light, ranging from an area light to a spot light. This is unseen mechanism is achieved by clever use of magnets and tensile wiring.

Customized controls that allows users to dim the light and flexing degree. (Photo Courtesy of Andy Zhou)

This work was supported by CSIRO, Australia’s national research agency. The CSIRO Flexible Electronics Theme is developing materials and processes to enable the low-cost manufacture of flexible electronics technologies such as displays, lighting and solar cells. Their mission is to develop the science and partner with industry to create new opportunities for manufacturing in Australia and overseas. For more information see www.csiro.au/flexibleelectronics

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Tokushima, Japan – 29 January 2025: Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, started mass production of a new deep UV LED (Part No. NCSU434D) in December 2024, with a peak w... READ MORE

Nichia, the world's largest LED manufacturer and inventor of the high-brightness blue and white LED, is launching a white LED (Part No. NS2W806H-B2) designed for LCD backlighting. This product adds a new green chip in addition to the exist... READ MORE