GE Recalls In Total 35,000 High Intensity LED Lamps over Impact Hazard

Recall date: March 16, 2016

Recall number: 16-120

Recall Summary

GE Lighting high intensity discharge (HID) LED lamps that is being recalled in U.S. and Mexico. (All photos courtesy of The U.S. Consumer Product Safety Commission)

Name of product:

High-intensity LED lamps

Hazard:

The lamp can separate from its base and fall onto consumers below, posing an impact hazard.

Consumer Contact:

GE Lighting at 800-338-4999 Monday through Friday from 8 a.m. to 8 p.m. ET, emaillightingconcerns@ge.com, or online atwww.gelighting.com and click on Product Recall at the bottom of the page for more information. 

Report an Incident Involving this Product

Recall Details

In conjunction with Mexico.

Units

About 35,000 (in addition, about 500 were sold in Mexico)

Details of the GE High Intensity LED Lamp label. 

Description

This recall involves GE Lighting high intensity discharge (HID) LED lamps. The lamps are used in lighting fixtures for warehouses, schools and gymnasiums. The lamps are 5 1/2 inches in diameter by 11 1/2 inches long and weigh about 3 pounds. The lamps were sold in a blue and white carton with “ED37/EX39 base” on the front and “PC:21259” on the back above the bar code. Recalled lamps have the GE logo and the following information on the white plastic base of the lamp: LED165/M400/740, 165W, 4000K, 20000 Lumens, China and date code K213 or K245.

Incidents/Injuries

The firm has received four reports of the lamp separating from the lamp base. No injuries or property damage have been reported.  

Remedy

Consumers should immediately contact GE Lighting for a free repair kit and installation guide.

Sold at

GE Lighting authorized dealers and electrical distributors nationwide, including Crescent Electric Supply Company, Graybar and W.W. Grainger Industrial Supply from September 2015 through December 2015 for between $250 and $300.  

Importer(s)

GE Lighting, of Cleveland, Ohio

Manufactured in

China

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
ams OSRAM’s OSIRE® E3731i and Stand-Alone Intelligent Driver (SAID) use OSP license-free protocol to connect color LEDs, sensors and microcontrollers. ams OSRAM, a global leader in intelligent emitting and sensing technologies, will... READ MORE

JBD, a pioneering MicroLED display manufacturer, has set a new standard with its Phoenix series microdisplay, achieving an industry-record white-balanced brightness of 2 million nits. JBD’s Phoenix - Native Monolithic RGB Panel Leveragin... READ MORE