Alternative Technologies for the High Pressure Sodium lamps (HPS)

News Source: 

Today most fluorescent lamps are regulated by the RoHS Directive. However, despite containing mercury, there are still exemptions. In the field of general illumination, High Pressure Sodium lamps (hereinafter abbreviated as HPS) remain the highest runner of mercury-containing lamps.

HPS is typically used in street lighting luminaires, classified under item 4(c) and for horticulture classified under item 4(f). They are exempt until at least February 24, 2027, due to the lack of alternative technologies. However, Nichia considers that the hurdles for alternative technologies, including commercial elements, have already disappeared through the remarkable development of LEDs in recent years and there is no need to extend the exemption. Below, Nichia will look at the current status and future possibilities of replacing HPS with LED technology, within street lighting and horticulture markets respectively.

High Pressure Sodium lamps (HPS) for street lighting

As the satellite image clearly shows, the most widely used outdoor light source in the world is HPS, which emit the nostalgic color of gaslight lamps. Examples include container yards glowing with the color of gaslights and cobblestone streets throughout Europe with street lighting aimed to retain the atmosphere of the medieval times.

Even with the rapid shift to LED lighting and the replacement of most conventional light sources such as fluorescent and incandescent lamps with LEDs, HPS is still extensively used because of their relatively high efficiency and long life amongst conventional light sources. That being said, it is hard to beat the rapid technological evolution of LEDs, especially for new street lighting, which is rapidly switching to LEDs. On the other hand, in familiar places such as old residential areas, parks, and city street lighting, there is a strong opposition to replacing the nostalgic color of gaslight lamps with the cooler white light of LEDs. In addition, recently attention has been drawn to so-called "light pollution" from the bluish white light of LEDs. The shift to LEDs in this market is a seesaw battle. Nichia's "HPS color LEDs" released in 2021 have the potential to change this situation and accelerate the shift to LEDs, which also contributes to the realization of a mercury-free society. Key features of HPS color LEDs compared with HPS include:

  1. Mercury-free
  2. Higher Efficiency in LEDs vs. HPS
  3. Allows instantaneous on/off cycling which can enable the capability of "smart lighting". This can also lead to additional energy savings and contribute to carbon neutrality.(HPS takes a few minutes to reach full brightness and are not capable of smart lighting functionality.)
  4. The same emission color as HPS to maintain the nostalgic atmosphere of the landscape.Higher CRI (Ra≥70) improves the color visibility and makes cities feel safer and more colorful.
  5. Reduces "light pollution" to humans, animals, plants, starry skies, and the natural environment, which has been a problem with bluish white light by LEDs.
  6. 2.5 times longer life than that of HPS supports frequency reduction of dangerous lamp replacement at high places, leading to a reduction of the cost.

Since its announcement, HPS color LEDs has drawn attention through its excellent "quality of light", in addition to minimizing light pollution, mercury free, decarbonization and energy savings. Interest in this technology has not only been from lighting fixture manufacturers but also from local governments, government agencies, International Dark Sky Association and other NGOs in various regions, with this interest, street lighting with HPS color LEDs started being installed globally. Nichia is proud to report that HPS color LEDs have filled in the missing piece especially the emission color of LED, and overall, alternative technology for HPS used in street lighting has been verified, leading to contribute to the realization of a sustainable society in a wide range of fields, including a mercury-free society.

High Pressure Sodium lamps (HPS) in horticulture

LED Lighting has already been widely adopted in closed-type indoor artificial farms where vegetables and fruits are grown. However, many HPS are still used today in greenhouses where natural sunlight is used as the basic light source in addition to supplements of artificial light on cloudy days, evenings and nights. This is also due to the relatively high efficiency and long lifetime of HPS vs. conventional light sources. In recent years though, LEDs have been used in most newly constructed green houses. Lately, LEDs have surpassed HPS in both efficiency and lifetime, and LEDs are able to adjust their color and spectrum to suit plant growth in a way that is not possible with HPS. It is believed that LEDs can increase the amount of a harvest, speed up the growth and the harvest season, and also improve the taste and nutritional value of vegetables and fruits in the future. In addition, HPS have disadvantages, including a high heat radiation which increases the cost of air conditioning and requires a large facility to keep a distance; HPS LEDs have significant advantages in these respects as well. Because of the various advantages of LEDs, it is becoming commonplace to use LEDs for newly constructed facilities, although there is a somewhat high economic hurdle to replace existing HPS with LED lighting, including the power supply and other components. The field of horticulture is constantly advancing, and a variety of LEDs have appeared on the market, including Blue/Red combinations, white, white and red, and so on. Through many experiments in its own vertical farm, Nichia has succeeded in commercializing "Hortisolis™”, the most suitable LED with the ideal spectrum for plant growth. Since its launch, this LED have been highly evaluated. Whether Nichia's "Hortisolis™” will retain its "best/optimum” status in the future, or whether something better will come along, nobody knows, but Nichia believes that at least it can be said that LEDs have already established themselves as an excellent alternative technology to HPS.

While HPS for general lighting are still widely used today, LEDs have already established themselves as an alternative technology that can be used, both technically and commercially. Nichia will make further efforts to continue rapid introduction of LEDs, and the RoHS exemption will end on February 24, 2027, to ensure the realization of a mercury-free in lighting filed.

 

TrendForce 2024 Global LED Lighting Market Analysis
Release Date: 01 February 2024 / 31 July 2024
Language: Traditional Chinese / English
Format: PDF and Excel
Page: 90-100 / Semi-Annual

If you would like to know more details , please contact:

Global Contact:
 
ShenZhen:
Grace Li
E-mail :  Graceli@trendforce.com
Tel : +886-2-8978-6488 ext.916
  Perry Wang
E-mail :  Perrywang@trendforce.cn
Tel : +86-755-82838931 ext.6800
Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Figure 1. Overall concept of face-fit surface-lighting micro-LEDs (FSLED) mask. a. Optical image of the FSLED mask showing uniform surface-lighting. schematic illustration of the FSLED mask. The 2D to 3D transformation procedure b. Difference ... READ MORE

The next generation of high-performance LEDs is now available: the OSCONIQ® C 3030 from ams OSRAM. Engineered for demanding outdoor and stadium lighting applications, this cutting-edge LED series combines exceptional intensity with thermal... READ MORE