Two Models in the Popular Permaliter® Wall Mount Perimeter Lighting Series are now offered in LED.
 
Hubbell Outdoor Lighting Inc. is proud to announce the expansion of the Permaliter® Wallpack Series with the addition of new LED options in the PGM3 and PVL3 models.  These new Permaliter® LED Wallpacks produce long 50,000 hour lamp life delivering a low energy, long life perimeter security lighting solution that provides 60-70% energy savings over traditional wallpack systems.  Available in both 4000K and 5000K color temperatures, the PGM3 (Glass) and PVL3 (Polycarbonate) wallpacks deliver a lateral spread that allows for typical spacing of three to four times the mounting height with excellent uniformity and performance.

The PGM3 LED Wallpack features a glass refractor with wide lateral coverage on non-cutoff distributions in typical commercial applications. The PGM3 delivers 4100 lumens at a nominal 5000K for typical mounting heights of 10-15 feet.  The PVL3 LED Wallpack features a polycarbonate refractor and one-piece, vandal resistant front for use in non-supervised locations. The PVL3 produces 3500 lumens and features 3 to 1 spacing to mounting height ratio for ideal uniform perimeter lighting in typical mounting heights of 10-15 feet.

The Permaliter® LED Series is a standard 120-277V, 50/60Hz fixture that features a thirty LED light engine driven at 700ma for maximum power and efficiency.  Additional options include a 347/480V driver, 10 KA surge suppression, and a 350 mA driver ideal for lower 10-12 foot mounting heights. The die-cast aluminum housing design not only provides a rigid mount but an excellent heat sink for the LED system, allowing proper operating temperature for optimum performance and long life.  The LED construction also allows for easy access to the engine and driver for future servicing.
 
Ideal for office buildings, shopping centers, restaurants, schools, warehouses, parking garages and other commercial applications, the Permaliter® LED Wallpacks are available with standard 0-10V dimming and are wet location listed.  PVL3 is offered with a Bronze finish, while the PGM3 Series is available in Bronze, Black, Gray and White. Designed for either recessed box or surface conduit wiring, the Permaliter® LED Wallpacks are easy to install and maintain making them ideal for non-supervised applications and security illumination.

Permaliter® LED Wallpacks 
 
Key Features:
•         Universal voltage  - 120-277V light engine (Optional 347/480V)
•         30 LED engine
•         Up to 4100 lumens – 69w
•         Available with glass (PGM3) or polycarbonate lens (PVL3)
•         4000K and 5000K high CRI LEDs provide optimal color recognition
•         Wide lateral spacing
•         Greater than 50,000 hours L70 rating
•         Designed for both recessed box or surface conduit wiring
•         Photo control accessory
•         CSA  Listed to UL1598 for use in wet locations
•         Five year limited warranty