GlacialPower Launches 40-48W LED Drivers with IP67 Rating

GlacialPower, a division of LED technology manufacturer GlacialTech Inc, is pleased to announce a new series of 40 to 48 Watt LED Drivers with DC output ranging from 24 V DC up to 57 V DC. The GP-LS45P series accepts a wide input range from 90 to 305 VAC, to handle AC supply fluctuations.

Suitable for interior and exterior use, the GP-LS45P drivers are IP67 rated for dustproofing and waterproofing. Active power factor correction makes efficient use of mains electricity. The driver supports a constant current mode supporting three optional types of dimming. There are five models in the GP-LS45P series, which provide DC output of 24 V, 36 V, 42 V, 48 V and 57 V respectively, and output power ranging from 40 up to 48 Watts.

GlacialPower LED Driver GP-LS45P Series. (GlacialPower/LEDinside)

Efficient LED Drivers with Dimming Options

The GP-LS45P drivers not only provide active power factor correction for efficient use of mains power, they also provide high power output efficiency. These drivers are fully compliant with Stage 3 of the stringent ErP (EU) No. 1194/2012 directive, which aims to greatly enhance the efficiency of energy-related products.

For easy integration and maximum efficiency there are three dimming mode options available: DC or electronic potentiometer dimming from 0-10 V, PWM dimming from 0-10 V, and 0K to 100KΩ resistance dimming. As well as running very efficiently in normal operation, the GP-LS45P series drivers also use almost no electricity in standby mode – they provide a no load consumption of less than 0.5W at 230 VAC.

Smooth Output Voltage for Long LED Lifetime

Output voltage from the GP-LS45P series is smooth and stable, as shown by the minimal noise and ripple specifications: from 200 mV to no higher than 250 mV, depending on the model, resulting in steady and consistent LED lighting. These drivers also help your LEDs start up in an instant, with a setup time of less than 0.5 seconds at 230 VAC.

Tough and Reliable LED drivers

The GP-LS45P series of drivers have a very wide operating temperature range, from -30° C to 50° C. In addition, these LED drivers' rugged IP67 rated enclosures are waterproof and dustproof enclosure to ensure integrity and stability in challenging indoor and outdoor environments. Safety features include Over-Voltage Protection (OVP), Over-Current Protection (OCP), Short-Circuit Protection (SCP) and Over-Temperature Protection (OTP), ensuring both the safety and long service life of this LED driver.

Features:

Universal AC input 90~305VAC.
Built-in Active PFC Function.
Protections: OVP, OCP, SCP and OTP.
3 in 1 dimming option (DC 0-10 V / PWM / Resistor) in constant current mode.
IP67 rated enclosure.
Compliant with ErP EU_1194_2012, Stage 3 directives for energy related products.
No load consumption is less than 0.5 W.
Set up time is less than 0.5 Sec at 230VAC.

Specifications

Model No.		LS45P-24C(A)	LS45P-36C(A)	LS45P-42C(A)	LS45P-48C(A)	LS45P-57C(A)
Output	DC Voltage	24V	36V	42V	48V	57V
	Constant Current Region	16 ~ 24V	24 ~ 36V	33 ~ 42V	33 ~ 48V	40 ~ 57V
	Rated Current	1.85A	1.25A	1.05A	1A	0.7A
	Current Tolerance	-5% ~ +5%
	Rated Power	44.4W	45W	44.1W	48W	40W
	Ripple & Noise (Max.)	200mV	250mV	250mV	250mV	250mV
	Efficiency at 240Vac(Typ.)	85%	86%	86%	87%	87%
	Voltage Tolerance	-1% ~ +5%
	DC Dimming (Optional)	DC 0-10V or Electronic Potentiometer 0-10V
	PWM Dimming (Optional)	Puls: Hi=10V Low=0V, Duty: 0%-100%, Fsw:0.5-3KHZ
	Resistance Dimming (Optional)	0K-100KΩ
	Set up time (Max.)	< 0.5 Sec / 230VAC at full load
	No Load Consumption (Max.)	< 0.5W at 230 VAC
Input	Voltage Range	90VAC ~ 305VAC
	Rated Volatge	100 ~ 240VAC / 277VAC (for North American Only)
	Frequency Range	47 Hz ~ 63 Hz
	AC Current (Max.)	0.6A at 100 ~ 240VAC / 0.25A at 277VAC for North American Only
	Power Factor	≧ 0.98 at 120VAC / ≧ 0.93 at 240VAC/ ≧ 0.9 at 277VAC, at full load
	Inrush Current (Max.)	COLD START 70A at 240VAC
	Leakage Current	< 0.5mA / 240VAC

Read more about GP-LS45P in GlacialPower's website:

http://www.glacialpower.com/products/led-driver-PFC2.htm#L6

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<

Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.