2012-01-13
IOV022 LED headlamp :
Iovision’s IOV022 headlamp is used branded international LED chipset, unique optical structure is provided smooth brightness with eye harmless, there has 3 modes as => ON : 125lm super bright at 1.6W 480mA -> Normal : 80lm at 0.8W 240mA -> Flicker -> OFF, patent design of Zooming focus is stepless 1:100 times from wide to tele distance, super aluminum thermal design, IP65 anti-dust and waterproof, multi-choice of its power sources by (1) Lithium battery, or (2) by AAA battery x3pcs, or (3) to have both battery pa...
Continue reading →
2011-08-25
Lumimodule Optical Corporation has been devoted in to developing green energy-saving lightings, so that to provide convenient and comfortable light-source environment for your life.Lumimodule Optical Corporation was established in 2001. Our technological core is advanced IC encapsulation procedure and patent. This technology is more suitable for the most advanced LED products compared to other existing encapsulation technologies. It can reduce the electrical character caused by encapsulation to ...
Continue reading →
2011-08-25
With many years of experiences in CCFL lighting assembling、optic LENS developing and LED energy saving lighting research, we have gained a fine reputation and popularity in the industry. From many international exhibitions, we also get the valuable customers and requests from worldwide. Our quality commitment has been approved though many strict trials and agreed by our valuable customers. Now in the market, the current lighting products still have the problems in brightness deficiency and low color rendering index. However, ADO chooses the high brightness an...
Continue reading →
2011-08-25
Rainbow Light Optical Technology Co. Ltd. is going to display four kinds of measurement instruments to provide the best and complete LED measurement instruments. Rainbow-Light micro-spectrometer is made by MEMS technology and applied on the development on LED measurement instruments. Spectral deviation is within plus or minus 0.1nm, reproducibility is with four ten thousandths, and resolution is within 0.8~1.5nm FWHM Features of LED Luminous Decay Monitoring Instrument: 1. Monitoring the change of LED luminous decay in the reality in o...
Continue reading →
2011-08-25
In accordance to global warming, in order to save electricity, lighting sensors have become widely used in areas where there is little passing traffic. Passive infrared (PIR) lighting sensors adopt the human body moving detection principle to control several lights on the same circuit. Also, we can use many PIR lighting sensors to control several lights on many circuits. Thus, detection area, lighting area and illumination can be planned flexibly. However, as for smaller spaces and little demand for lighting, the PIR lighting sensor combined with an illuminant is a convenient d...
Continue reading →
2011-08-25
Full Sun Optotech has insisted that its activity in the lighting space was ultimately focused on helping LED component customers knock down roadblocks to widespread SSL deployment. 120 lm per watt module perfectly matches to high efficient LED bulb. CRI 92 meets the museum light requirement. ...
Continue reading →
2011-08-25
As the luminous efficiency of LED chip was not high at early stage, it has not been able to achieve indoor lighting requirement therefore could only be applied at lower lumen lighting goods. LED spotlight has gradually replaced the traditional halogen lamp because there is no ultraviolet or infrared ray emitted from LED lighting, and it does not deteriorate on displayed goods. However, as the LED base generates high-temperature heat so most manufacturers can only use aluminum forming shell as heat-dissipation solution. As the result, the current LED spotlights have the alum...
Continue reading →