HB LED Driver Supports Green Lighting Designs

Maxim Integrated Products has introduced the MAX16834, a current-mode, high-brightness LED (HB LED) driver for boost, buck-boost, SEPIC, and high-side buck topologies.



This device is designed to reduce the size, complexity, and cost of LED driver solutions, simplifying the implementation of green lighting technology. Towards this end, it integrates a high-side, current-sense amplifier; a PWM-dimming MOSFET driver; and robust protection circuitry. Providing the efficiency and thermal-management capabilities critical to LED system designs, the MAX16834 is suitable for applications such as LED automotive exterior lighting, LCD backlighting and architectural lighting.

The MAX16834's comprehensive feature set enables the implementation of boost or buck-boost DC/DC converters with minimal external components. In addition to driving an n-channel power MOSFET by the switching controller, the MAX16834 drives an n-channel PWM-dimming switch to achieve a wide, 3000:1 PWM-dimming range. To further enhance design flexibility, the device offers analog dimming that allows the LED current to be controlled by an external DC voltage. The built-in, high-voltage current-sense amplifier and up to 1MHz switching frequency allow designs to be optimized in terms of efficiency and size.

In addition, the MAX16834 integrates protection circuitry to ensure reliable operation in rugged environments. The driver provides analog thermal-foldback protection to allow the use of an external thermistor to reduce the LED current when the temperature of the LED string exceeds a specified temperature point. It also includes a fault-output flag for overvoltage, overcurrent and thermal warning faults, while its programmable, true-differential overvoltage protection meets stringent automotive requirements for LED lighting and display backlighting.

The MAX16834 features a solution that provides > 92% input power factor correction without the need for an additional PFC controller. This feature, together with thermal-foldback protection and low cost, makes this HB LED driver an ideal device for MR16 spotlights and similar applications powered from AC voltage sources.

This LED driver is fully specified over the -40°C to +125°C automotive temperature range and is available in a thermally enhanced, 4mm x 4mm, 20-pin TQFN package with exposed paddle. Prices start at $1.24 (1,000-up, FOB USA).

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
Display devices have been used for many years as a means of HMI (Human Machine Interface) to connect humans and machines interactively, and their usage are still expanding. Automotive interiors are no exception to this trend, with an increasing ... READ MORE
About LiDAR Automotive industry trends In recent years, many vehicles have been launched with ADAS (Advanced Driver Assistance Systems) as standard equipment. As the future evolves towards more automated driving, sensing around the vehicle i... READ MORE