TILS 2014: Environmental energy saving and low consumption of the 5th generation lighting – YCC TEK High- End Induction Lighting

Global warming, climate change and CO2 emission become increasingly serious. Energy consuming excessively, everyone makes improvement on the machine to settle the problem. YCC TEK locates in Hinchu science Park development the fifth Induction Lighting with energy-saving and low consumptions.
 

 

The Prerequisites to be the 5th generation:

  1. The bulb internal should not have the fatal element –tungsten or electrode (LED is an electrode)
  2. No more waste earth limited natural resources
  3. Bulb life cycle – need to be over 60,000~100,000 hours
  4. Fixture need to be safe and easy to make bulb replacement. The fixture need to be used over 10~30 years
  5. Healthy life – cant have Ultraviolet light and blue ray light to hurt the eyes
  6. Energy saving over 60~80%
  7. Low carbon and low temperature – temperature need to be lower than traditional lamp over 200~300℃ and reduce 70~80% CO2 emission.
  8. Pass the international standard (CNS, BSMI, UL, CE, CB, PSE, ROHS..) and no EMI to interference hazard – no harmful to human body and no interference the machine.


     

YCC TEK induction light reaches the strict standard, energy saving and reduce carbon emission. YCC TEK induction lighting 100W replace traditional mercury lamp 500W to be widely used by the factories.
Taiwan well-known soft drink factory- Hay Sung uses YCC Tek Induction lighting with good performance. So, the new building also uses YCC TEK induction lighting. If the new building uses the traditional mercury lamp or Metal halide, it will consume more nine hundred and then thousand KHz which will cause huge electricity bills. Well-known food manufacturer - Laurel foods have frozen storage (-28 oC) requirement. YCC TEK induction lighting is lower than traditional mercury lamp 250 oC . Therefore the new building use 480 sets. The owner says that it can save Eight hundred thousand material cost and future electricity cost.
Multinational renowned machine tool manufacturers- Dongtai machinery group uses YCC TEK Induction Light more than 2 years. It is zero defective rates which the customer is very satisfied. Therefore the new building in China is also purchase YCC TEK induction lamp for installation. YCC TEK induction light has sell to Japan, Germany, Indonesia, India, Singapore, Malaysia,…etc. And the local market to Formosa Plastics, Yulon, AWEA, machinery and over thousand of the company already installed YCC TEK induction lighting.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
Display devices have been used for many years as a means of HMI (Human Machine Interface) to connect humans and machines interactively, and their usage are still expanding. Automotive interiors are no exception to this trend, with an increasing ... READ MORE
About LiDAR Automotive industry trends In recent years, many vehicles have been launched with ADAS (Advanced Driver Assistance Systems) as standard equipment. As the future evolves towards more automated driving, sensing around the vehicle i... READ MORE