QD LEDs Break Limitation of Miniaturization in Fine Pitch Displays

Thin fine pitch indoor LED displays have caught on the market in recent years, but a big challenge for the industry is miniaturizing LED suitable for display smaller than 100-inch, said Min-Hsun Hsieh, Vice President (VP) of R&D Center at EPISTAR during a recent interview with LEDinside.

“Fine pitch indoor LED displays have a lot of advantages in the 100-150 inch display range, but the minimum size of LED package made of widely-used PLCC, plastic leaded chip carrier, is limited to 0505.” said Hsieh. “It becomes very costly to further miniaturize the LED package and to reach the request of the uniformity of wavelength for displays smaller than 100-inch.”

To break this technical bottleneck, EPISTAR has turned to a solution that sprays quantum dots (QD) onto CSP LEDs.

By using the QD enhanced CSP LEDs, the leading Taiwanese LED manufacturer has taken advantage of the wire-bonding free chips to make LED packages smaller than 0.5mm, miniaturizing package sizes down to 0303 and 0202.

Moreover, the resulting indoor fine pitch QD LED displays can be smaller than 60-inch, said Hsieh.

According to Hsieh, the advantages of the QD solution is that it not only improves the uniformity of blue and green emission, but also solves the issue from producing expensive AlInGaP (red) LED flip chips. The QD LED chips are also more efficient in blue and green range compared to conventional LEDs.

The wavelength variation of EPISTAR’s mass produced blue LED chips is 5 to 12nm, which is still far from the aim of achieving the goal of 3 to 4nm in request of fine pitch display.

Additionally, it is very costly to convert red LED chips from vertical structure to flip chip which is needed in smaller sized LED displays.

“Blue and green LEDs are grown on sapphire substrates, which is transparent to let light come through. But red LEDs are gown on opaque GaAs substrates and they have to be transferred to glass or another transparent substrates in order to make them flip chips.” explained Hsieh about the more costly manufacturing process for red LEDs.

EPISTAR’s R&D VP Min-Hsun Hsieh will be speaking more about QD LEDs at the upcoming LEDforum 2016 hosted by LEDinside that will take place on Sept. 30, 2016 at Room 201, National Taiwan University Hospital International Convention Center in Taipei.

(Authors: Philip Chang, Analyst, LEDinside and Judy Lin, Chief Editor, LEDinside)

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Violumas, provider of high-power UV LED solutions and inventor of 3-PAD LED technology, is proud to launch the release of new 275nm and 265nm LEDs in mid-power, high-power, and high-density packages. The radiant flux of the new 275nm and 265nm... READ MORE

DURHAM, NC – November 12, 2024 –– Cree LED, a Penguin Solutions brand (Nasdaq: PENG), today announced the launch of its new CV28D LEDs with FusionBeam™ Technology, a groundbreaking advancement for the LED signage market... READ MORE