GreeNavs Built LED-armature with Built in Motion Detector

Overview
The new LED-armature (called LEDESIA) is wall/ceiling mounted for general lightning. Due to it’s diffuser it spreads the light evenly in the hole room.

The armature is connected directly to 230VAC and dimmable through a 1-10V control-bus.  LEDESIA uses 14W at full power, this is equal (in light) to one 60W bulb, 2x11W or 1x22W fluorescent light.

Through the 1-10V the armature is dimmable down to 1W.

The focus has been on creating an armature that is quick and easy to install, having a very strong good quality of light (over 90 CRI) and power saving (moneysaving) for the consumer (just by replacing old fluorescent bulbs you will save energy, but by adding the built in motion sensor you can save up to 80-90% of energy).

There are two versions of sensors available, one that turns the light on when a detection is done and then turns the light after a chosen time.

The other turns the light on 100% when a detection is made, then (after chosen time), the light goes down to 10%, (around 1W). In this way it will never be totally dark in the area. You will see if someone else is present and it’s still enough light to see stairs and keyhole if (for some reason) it doesn’t detect.

Specification
Power: 14W
Lumen: 750lm
Colour temperature:  2950K / 3660K
CRI: > 90 CRI
Input Voltage: 185 ~ 240 VAC
Dimmable: Yes, (by 1-10V)
Life-span: > 70 000h
IP-class: 44
Certifi cation: CE
Working temperature: -25˚C to +40˚C
Weight: 1500g (in packaging)
Dimensions: 370 x 120 mm

Application

LEDESIA is designed to replace existing armatures in the easiest way possible.  All that is needed is 3 screws to mount the armature to the wall or ceiling, using existing cables (phase, zero and ground) and connect them by the quick connection socket. If the sensor is used, you only have to adjust lightning-time and sensitivity for this one as well.

Samples for Evaluation
Samples can be ordered via info@greenav.se and datasheet can be downloaded via www.greenav.se/en/produkter/ledesia14w/

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

XLamp® XP-L Photo Red S Line LEDs Deliver High Efficiency for Horticulture Applications Revolutionizing Horticulture Lighting with Cree LED Cree LED is committed to delivering innovative lighting solutions for horticulture and agriculture,... READ MORE

For most of history, humans used flames to generate light. Eventually, they discovered that a super-heated metal element in a light bulb could produce useful illumination, only for this technology to be superseded by the LED. One common featur... READ MORE