Research Introduces New Nanoparticle Technique to Improve LED Emission and Reduce Energy Consumption

Improving performance of LEDs is a continuous task for researchers. A team consisting of researchers of Imperial College London introduced a method of embedding tailored meta-grid of nanoparticles to LEDs to enhance their light output and lifetime.


(Image: Debabrata Sikdar, John B. Pendry, and Alexei A. Kornyshev)

The method was published in Light Science & Application in July by Dr. Debabrata Sikdar, Prof. Sir John B. Pendry and Prof. Alexei Kornyshev from Imperial College London. They reported an alternative route for improving light extraction from LEDs. It proposes increasing transmission of the light generated inside the LED chip across the LED-chip/encapsulant interface by reducing the Fresnel reflection loss at the chip/encapsulant interface within a fixed photon escape cone, while prescribing minimal changes to the manufacturing process.

The analysis shows that transmission across a typical LED-chip/encapsulant interface at the peak emission wavelength can be boosted up to 99%, which is otherwise mere 84% at normal incidence. The scheme could provide improved transmission within the photon escape cone over the entire emission spectrum of an LED. This would benefit energy saving, in addition to increasing the lifetime of LEDs by reducing heating of the chip from unwanted reflections within the chip.

The scientists addressed that the scheme has the potential to be easily implemented and adopted into existing semiconductor-device technologies, and it can be used separately or in conjunction with other methods for mitigating the critical angle loss in LEDs.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
Display devices have been used for many years as a means of HMI (Human Machine Interface) to connect humans and machines interactively, and their usage are still expanding. Automotive interiors are no exception to this trend, with an increasing ... READ MORE
About LiDAR Automotive industry trends In recent years, many vehicles have been launched with ADAS (Advanced Driver Assistance Systems) as standard equipment. As the future evolves towards more automated driving, sensing around the vehicle i... READ MORE