AmerTac Recalls Three LED Night Lights Caused by Fire and Burn Hazards

The U.S. Consumer Product Safety Commission has partnered with AmerTac to recall three AmerTac night lights due to the fire and burn hazards. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.

Name of Product: LED Night Light
Units: About 227,000
Importer: American Tack & Hardware Co. Inc. (AmerTac), of Saddle River, N.J.
Hazard: An electrical short circuit in the night light can cause it to overheat and smolder or melt, posing fire and burn hazards to consumers.
Incidents/Injuries: AmerTac has received 25 reports of the night lights smoking, burning, melting and charring. No injuries have been reported.

Each AmerTac night light has a model name and two model numbers. The model name and a secondary model number appear only on the packaging. The basic model number appears on the back of the night light. The night lights are rectangular, about 2-3/16 inches high, 3-1/2 inches wide and 1-1/4 inches deep. The front housings for each are either white- or nickel-colored plastic with four horizontal vents and a round light sensor above the top vent. The backs of the night lights are gray plastic with the AmerTac(TM) logo, the basic model number, "SY" identification code and "ETL" molded into them. Only models bearing "SY" on the back are being recalled. The following night lights are being recalled:
Model Name on Packaging Model Number on Packaging Model Number on Night Light
        Amerelle                71190        71190 or 71190A
        Amertac                 327895
        Everyday Basics     076092

Sold at: Hardware stores, home centers and lighting showrooms from March 2009 through October 2010 for about $6.
Manufactured in: China.

Remedy: Consumers should immediately stop using the recalled night lights, remove them from the wall sockets and contact the firm for instructions on receiving a full refund.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
ams OSRAM’s OSIRE® E3731i and Stand-Alone Intelligent Driver (SAID) use OSP license-free protocol to connect color LEDs, sensors and microcontrollers. ams OSRAM, a global leader in intelligent emitting and sensing technologies, will... READ MORE

JBD, a pioneering MicroLED display manufacturer, has set a new standard with its Phoenix series microdisplay, achieving an industry-record white-balanced brightness of 2 million nits. JBD’s Phoenix - Native Monolithic RGB Panel Leveragin... READ MORE