Are "Plug and Play" Control-integrated Luminaires Ready for Prime Time?

LRC Releases Initial Study Results

In a large open office on the fourth floor of the Lighting Research Center (LRC) at Rensselaer Polytechnic Institute, lighting scientist Leora Radetsky lifts the blinds and lets in the sunlight. The overhead LED luminaires dim in response, fluidly, maintaining consistent light levels on the desk spaces. She lowers the blinds and the luminaires instantaneously increase light levels in response.

“These intelligent luminaires with integrated sensors and controls promise ideal light levels on the workplane with significant energy savings,” said Radetsky, who is leading a team of researchers to evaluate this emerging technology, in a study funded by the Bonneville Power Administration (BPA) and Washington State University.

Lighting Research Center (LRC) at Rensselaer Polytechnic Institute releases study on "Plug and Play" Control-integrated Luminaires.(LRC/LEDinside)

Since each luminaire has a built-in occupancy sensor, ideally, the system can more accurately determine when a person is in the room, compared with motion sensors of the past decade. After a specified vacancy period, the luminaires fade from a task level to a background level or switch off. The integrated photosensors, with automatic dimming daylight harvesting, also promise to maintain consistent light levels in response to fluctuations in available daylight.

Radetsky and her team are evaluating commercially-available intelligent LED luminaires with integrated sensors and controls to examine system operational characteristics, commissioning, and energy savings under field conditions, and conducting human factors experiments to study installation and usability. The systems are being evaluated in a daylighted office space and a conference room at the LRC. 

The research team has published their initial findings, and the report is available at the BPA website. The LRC’s Lighting Energy Alliance (LEA) partnered with BPA on this phase of the project to expand the number of products evaluated. Current LEA members are Efficiency Vermont, Energize Connecticut, and National Grid.

Key findings from the report include the fact that the systems have the potential for significant energy savings compared to time clock control or power density requirements, although energy usage depends on the system configuration. Manual-on controls appear to save more energy than automatic-on controls. One system provided access via USB to instantaneous power readings. Beyond that, none of the systems logged or reported energy usage.

Regarding installation and usability, the LRC found that all of the products tested were easy to install, but challenging to commission. Initialization of some of the wireless dimming wall switches was complicated, and the systems appeared to lack any mechanism to adjust the default sensor-to-task light ratio. In some cases, this produced low light levels and occupant dissatisfaction. When the ambient light levels were dim, occupants were satisfied with products that provided manual override capability, and products without this capability were less satisfying. Additional findings are available in the full report.

Radetsky is currently evaluating three additional systems with integrated sensors and controls, and expects to have a report published by the end of the year.

To be notified when research results are available, sign up for LRC news alerts at http://www.lrc.rpi.edu/aboutUs/mailingList.asp

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
Display devices have been used for many years as a means of HMI (Human Machine Interface) to connect humans and machines interactively, and their usage are still expanding. Automotive interiors are no exception to this trend, with an increasing ... READ MORE
About LiDAR Automotive industry trends In recent years, many vehicles have been launched with ADAS (Advanced Driver Assistance Systems) as standard equipment. As the future evolves towards more automated driving, sensing around the vehicle i... READ MORE