Colorado Grower Optimizes Cannabis Operation for Hot Climate with LumiGrow

(Image: LumiGrow)

About The Spot

The Spot is one of Southern Colorado’s earliest recreational cultivation facilities. Their boutique-style facility houses 430 plants under 20,000 sq ft of roof, and emphasizes utmost importance on quality. VP and Chief Operating Officer, Dave Munn proclaims, “We’ve been doing this since recreational was legal, and were one of the first to have a recreational license in Colorado. Quality is everything for us, so the ability to produce consistently is of the highest importance.

The Spot Runs into Problems Due to Hot Climate

Cultivation at The Spot used to be lit solely by HPS lighting, but due to climate fluctuations, their growers were running into critical problems. “It’s common in our region for ambient temperatures to reach triple digits, and when this happened, our rooms would get hotter than our HVAC system could handle.” says Dave Munn. “We were looking into how to keep this crippling heat from damaging our crops, but the HVAC companies were looking to charge $400,000 to $800,000 to retrofit our system correctly.”

Dave further notes that, “I think this is a problem that everyone is struggling with to some degree. In many cases, HVAC systems aren’t designed for indoor grows when you consider the climates that growers have set up their operations.”

“We’re thrilled to be getting a 50% rebate from our utility while solving our heat load problem all at once!” – VP and Chief Operating Officer, Dave Munn

Solving Heat Loads and HVAC Requirements with LumiGrow

“We came to LumiGrow seeking a solution for our heat load problem. We knew that LEDs ran over 50% cooler than HPS, but we wanted to explore how performance matched up.” explains Dave Munn. “Immediately we’ve seen that the low heat load is even more dramatic than expected. This week we’ve seen over 102 degree Fahrenheit ambient temperatures, but we’re keeping our grow rooms at 76 degrees.

Impressively enough, the HVAC is finally cycling on-and-off letting us know that we’re not even pushing full capacity yet! When lighting with HPS, our HVAC never cycled off even with lower outside temperatures than we’re seeing with this current heat wave.”

The Spot is currently running 28 LumiGrow LED lamps under 7 tons of AC and have kept from having to upgrade their HVAC. “Someone who’s engineering a building could certainly lower the cost of buildout by starting with LEDs, and getting all of the ancillary benefits out of the gate.” informs Dave.

Seeing Crop Benefits with LEDs In Flower 

When previously growing with HPS, Growers at The Spot were seeing their plants get shocked when moving from vegetative to flower rooms. “Back in the old days we had to compensate for this crop stress by adjusting our lighting for the first week of flower, but now with LumiGrow LEDs we haven’t seen any crop stress when turning rooms and can keep lighting strategies consistent. Only three weeks into flower and we’re already seeing spacing of the nodes are 2x denser under LEDs than HPS, and our crops’ leaves are dark and emerald in color with astounding uniformity. We believe that the spectrum of the LEDs and low ambient temperatures are keeping the plants growing healthy.” says Dave Munn.

Receive a 50% Rebate for Choosing Efficiency

The Spot continues to save by receiving a 45% to 50% rebate on the cost of their LumiGrow fixtures by choosing an energy-efficient solution. “I would encourage anyone considering LumiGrow lighting to contact LumiGrow, contact your utility, and see if you’re eligible for a rebate. Getting paid 50% back and seeing higher performance than our previous industry-standard HPS lights is really an easy choice. Catching up to modern times really has lots of benefits, it just takes a little research and a quick call to get setup.” recommends Dave.

(Content source: Lumigrow)

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
Display devices have been used for many years as a means of HMI (Human Machine Interface) to connect humans and machines interactively, and their usage are still expanding. Automotive interiors are no exception to this trend, with an increasing ... READ MORE
About LiDAR Automotive industry trends In recent years, many vehicles have been launched with ADAS (Advanced Driver Assistance Systems) as standard equipment. As the future evolves towards more automated driving, sensing around the vehicle i... READ MORE