Mikro Mesa Develops Low Temperature Transfer Technology to Process 3µm Micro LEDs

Mikro Mesa Technology announced a breakthrough in Micro LED mass transferring and bonding which successfully transferred Micro LED chips sized 3µm to manufacture a 4-inch display.


(Image: Mikro Mesa)

Mikro Mesa’s technology is capable of transfer chips sized 2 to 5 µm with large transfer stamp size (close to 4 inches) which would reduce transfer counts and the cycle time. By using the pick and place method, the mass transfer process can bond different color uLED chips and make a full color display.

The company also noted that the transfer technology can produce display with a resolution up to 1,800 dpi with millions of Micro LED chips, enabling large size applications including TVs above 55-inch. In addition, the technology is featured with low temperature  (below 200 degree Celsius) and pressure-free pitch bonding for better yield. The low temperature process also fits the requirements of flexible and transparent display production.


(Image: Mikro Mesa)

Vertical structured Micro LEDs are used in Mikro Mesa’s proprietary manufacture process. According to Mikro Mesa, the structure allows the current distributed more evenly compared to flip-chip structure and supports higher input.

Mikro Mesa Technology was established in 2014 by Dr. Li-Yi Chen for Micro LED technology development. The company has worked with China Electronics Panda on Micro LED since 2017 and announced its technology breakthrough for the next generation display technology. Mikro Mesa believes that this technology progress plays a key role for Micro LED commercialization. Currently the company owns a patent portfolio of 36 U.S. granted patents and more than 100 pending world patents.

Chen said, "This elegant technology will help Micro LED display to eliminate the cost obstacle to enter the consumer market which is dominated by OLED and LCD today. Because of the tiny chip size, the material cost can be reduced much further. That makes the uLED display can compete with OLED even LCD in the future."

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Speed and precision for home appliances, mobile robots, autofocus for cameras, building automation, inventory management systems, security systems, and virtual barriers Accurate, low-power measurements with rapid response times for superior re... READ MORE

Improved LED performance and the broadest color range provide even greater design flexibility DURHAM, NC – August 1, 2024 –– Cree LED, an SGH company (Nasdaq: SGH), announced today the launch of its higher performance XLamp&r... READ MORE