New 'Diamond LED' Resists High Temperature and Large Current

A deep UV LED using diamond semiconductor has been developed by National Institute of Advanced Industrial Science and Technology of Japan (AIST), with the details of the development planned to be disclosed at the 56th Spring Meeting of the Japan Society of Applied Physics taking place from March 30.

The new deep UV LED uses a p-i-n-structured diamond semiconductor stacked on the 2mm-square diamond substrate, emitting deep ultraviolet light of 235nm wavelength, with output of 30μW under a current of 320mA.

There are two important characteristics of this new LED according to AIST. Firstly, its luminous efficiency continues to increase even under a large current, secondly, it can well resist high temperatures. Specifically speaking, with a current of a density exceeding 2,000A/cm2 through a 120μm-diametered electrode, the diamond LED still can have its luminous efficiency increasing without being saturated, according to AIST. As to the excellent heat resistance, even when temperature rises to 420°C, the light emission intensity of the LED does not degrade but continues to increase, AIST said.

The diamond LED emits light because of the generation of "excitons." For general LEDs, the excitons is vulnerable to heat and often deteriorates quickly, while the excitons generated in the diamond LED are very stable and will not break until 600°C, which is the major reason of its excellent temperature resistance.

At present, the commercialization of diamond LEDs is limited by the expensive price of the diamond substrate, with the available diamond substrates usually to be several square millimeters in size.

To solve this problem, AIST said they have been developing a technique to stack a polycrystalline diamond semiconductor film on a Si wafer, with the prototype formed with the new technique having efficiency only an order of magnitude lower than the currently developed diamond LED. "Because it only requires quite common materials such as silicon and methane, when the technique becomes practical, diamond LEDs can be produced at a very low cost."

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Violumas, provider of high-power UV LED solutions and inventor of 3-PAD LED technology, is proud to launch the release of new 275nm and 265nm LEDs in mid-power, high-power, and high-density packages. The radiant flux of the new 275nm and 265nm... READ MORE

DURHAM, NC – November 12, 2024 –– Cree LED, a Penguin Solutions brand (Nasdaq: PENG), today announced the launch of its new CV28D LEDs with FusionBeam™ Technology, a groundbreaking advancement for the LED signage market... READ MORE