Ultra-Low Silicone Thermal Gap Filler Provides High Thermal Conductivity and Conformability

MH&W International has added new TP-S3LS ultra-low silicone gap fillers to its line of thermal interface materials. TP-S3LS pads contain less than 50 parts per million of silicone while providing 3.0 W/mK of themal conductivity between hot components and their heat sinks.


 
The gap filler's minimal silicone content makes it suitable for use in silicone-sensitive applications including medical electronics, laser optics and telecommunications where silicone-based outgassing can lead to contamination and condensation issues or leave oily residues that interfere with process applications.

Pads of TP-S3LS material are soft and compliant for easy compression and filling of air gaps between irregular mating surfaces. The material's Shore 00 hardness is 55. TP-S3LS pads can be used in temperatures up to 200°C, which exceeds the use range of silicone-free gap fillers. The material has a UL 94 flame class rating of V-0. Its dielectric breakdown voltage is more than 5.0 kV.

New TP-S3LS gap filler material is available in 210 x 297 mm (8.3 in x 11.7 in) sheets or die-cut parts. Standard sheet thicknesses range from 0.5 to 5.0 mm (0.020 in to 0.196 in). An optional fiberglass liner is available on 0.5 mm (0.020 in) thick pads where added handling strength is needed.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
Display devices have been used for many years as a means of HMI (Human Machine Interface) to connect humans and machines interactively, and their usage are still expanding. Automotive interiors are no exception to this trend, with an increasing ... READ MORE
About LiDAR Automotive industry trends In recent years, many vehicles have been launched with ADAS (Advanced Driver Assistance Systems) as standard equipment. As the future evolves towards more automated driving, sensing around the vehicle i... READ MORE