Applied Materials, Merck and Braunschweig University Awarded Funding by German Government for OLED Research

Applied Materials, Inc., Merck KGaA and the Braunschweig University of Technology (TU-BS) Tuesday announced that they have been awarded a grant by Germany’s Federal Ministry of Education and Research (BMBF) to develop processes to lower the cost of manufacturing organic light-emitting diode (OLED) lighting for general illumination applications. Applied will spearhead the three-year project, named Light InLine (LILi), joining forces with Merck, a leading manufacturer of high performance OLED materials and TU-BS, an internationally recognized center for OLED research. Work on the LILi project will be centered at Applied Materials’ advanced development facility in Alzenau, Germany.

The LILi project aims to address challenges such as limited lifetime and high costs for OLEDs to be widely adopted, by developing large-area manufacturing processes using high-performance organic materials and efficient device design.

“Solid state lighting is an important component of an energy-efficient future,” said Dr. Mark Pinto, senior vice president, corporate chief technology officer and general manager of Applied’s Energy and Environmental Solutions Organization. “OLED technology aligns well with our equipment used for manufacturing flat panel displays. We’ve already delivered a system that is now in pilot manufacturing at a leading European lighting manufacturer. Through the LILi project, we expect to further optimize this technology to increase the quality and drive down the cost for OLED lighting applications.”

The total cost of the OLED project will amount to approximately €7.49 million, which includes €3.26 million to be provided by the German Federal Ministry of Education and Research and €4.23 million to be contributed by the industry partners. The grant (FKZ 13N10611) is part of the BMBF’s “OLED 2 – Organic Light Emitting Diodes - Phase 2” initiative, which seeks to support OLED collaborative research and encourage OLED manufacturing in Germany. For more information, visit the project website at www.liliproject.com.

Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

For most of history, humans used flames to generate light. Eventually, they discovered that a super-heated metal element in a light bulb could produce useful illumination, only for this technology to be superseded by the LED. One common featur... READ MORE

Violumas, provider of high-power UV LED solutions and inventor of 3-PAD LED technology, is proud to launch the release of new 275nm and 265nm LEDs in mid-power, high-power, and high-density packages. The radiant flux of the new 275nm and 265nm... READ MORE