LRC Evaluates Audi Advanced Headlight Systems for Transportation Lighting Alliance
Through its Transportation Lighting and Safety program, the Lighting Research Center (LRC) at Rensselaer Polytechnic Institute is evaluating the potential for new lighting technologies and approaches to improve driving safety at night, including new car headlight systems. For the study, vehicle manufacturer Audi AG has provided the LRC with an A7 equipped with adaptive high beam “matrix lights” that allow drivers to benefit from using high beams all the time while selectively dimming a portion of the beam in the direction of other drivers to prevent glare. In the Audi system, the beam pattern is split into numerous individual LEDs arranged in a grid or “matrix” that adapts to the surroundings in real-time. The lighting system is being evaluated by LRC researchers this June.
Audi LED matrix headlights. (All photos courtesy of Audi)
The LRC earlier studied adaptive high beams as part of a project for the National Highway Traffic Safety Administration (NHTSA) that resulted in a report to Congress on nighttime glare and driving performance. Michael Perel, retired chief of the NHTSA Human Factors Division who initiated the project, said, “At that time, because of driver glare complaints and high nighttime crash rates, we wanted to investigate whether dynamically changing the forward light distribution in response to real-time road and traffic conditions could provide drivers with increased seeing distance without causing increased glare. The study did find potential benefits with this concept, variations of which are now being implemented by Audi and other manufacturers.”
LRC’s research for NHTSA demonstrated that forward visibility under adaptive high-beam systems was comparable to that under high beams, while disability and discomfort glare for oncoming drivers were comparable to levels experienced when facing low beams. The results of a recently published LRC study of driver visual performance suggest that nighttime crashes might be reduced up to 7% when adaptive high beams are used, relative to low-beam headlights.
Audi LED matrix headlights on the road.
The research team, led by Director of Transportation and Safety Lighting Programs John Bullough and LRC Director Mark Rea, will evaluate the safety impacts of these new adaptive high-beam systems, which are beginning to appear on international vehicle models.
Current requirements for vehicle forward lighting in the U.S. specify the photometric performance of low- and high-beam headlight patterns, and vehicles are required to have a set of low-beam and a set of high-beam headlights conforming to these specifications. Adaptive high beams have not been used on vehicles in the U.S. because the modifications to the high-beam beam pattern result in a pattern of illumination that does not conform with either the high- or the low-beam performance standards.
“Our expectation is that testing at Rensselaer of the Audi MatrixBeam system used in Europe will help ongoing standards development efforts in the U.S.,” said Stephan Berlitz, Head of Development, Lighting Functions and Innovations at Audi. “We believe the introduction of this technology in the U.S. would be very well-received by customers, just as it has been in Europe and elsewhere, so we are happy to do all that we can to support standards and test procedure development for the U.S. market.”
Although these systems have been widely used in many countries, few tests have been conducted in the U.S. Through the LRC’s evaluations, Bullough and Rea hope to provide objective evidence that might be useful in assessing whether and how adaptive high beam systems might provide safety benefits compared to conventional vehicle headlights, and how to consistently measure and specify their performance.
The study is sponsored by the Transportation Lighting Alliance (TLA), consisting of vehicle and lighting manufacturers Audi, Automotive Lighting, Hella, OSRAM SYLVANIA, Philips, and Varroc Lighting (www.lrc.rpi.edu/programs/transportation/TLA).
More information
[VIDEO] Adaptive matrix headlight testing at the LRC
Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.
ams OSRAM’s OSIRE® E3731i and Stand-Alone Intelligent Driver (SAID) use OSP license-free protocol to connect color LEDs, sensors and microcontrollers.
ams OSRAM, a global leader in intelligent emitting and sensing technologies, will... READ
MORE
JBD, a pioneering MicroLED display manufacturer, has set a new standard with its Phoenix series microdisplay, achieving an industry-record white-balanced brightness of 2 million nits. JBD’s Phoenix - Native Monolithic RGB Panel Leveragin... READ
MORE
CN
TW
EN
