LEDinside: Chinese Automotive Lighting Market Trend in 2017

According to the latest report from LEDinside, a division of the market research firm TrendForce, 2017 Chinese Automotive Lighting Market Report, the conventional passenger car in 2016 in China hit 22.50 million cars and by 2017 the number is expected to have reached 23.80 million with a hike of 5.8% YoY. The market was mainly under the control of joint ventures before 2016, whereas after 2016 the sales of domestic automobile brands rose annually when Chinese automakers advanced their production quality. The passenger car market is anticipated to increase with more and more emerging cities showing up. Furthermore, as for new energy passenger car market, considering about aesthetic design and energy saving, LED automotive lighting market demand is increasing, which has received much market attention.
 
LED Penetration Rate in Conventional Passenger Car Market
 
High /Low Beam- Despite high prices, major international automotive lighting manufacturers are keenly developing mid/low range LED headlamps in China to not only cater to the demand of local market but to reduce the development and production cost. However, at this moment in China, noticeable LED headlamp use can only be witnessed in the high- and mid-range auto market. Compared with the average LED penetration rate of 12% in the global headlamp market, that in China is only 2% in 2017.
 
DRL- Since the daytime running lamp is yet to be standard equipment in China, many installed on mid-range cars function as position lamps and they do not usually perform as well as their equivalents in Europe in terms of luminous efficacy and other specifications. Yet daytime running lamps are commonly seen on mid-range cars in China. The introduction of LED to daytime running lamps in China reaches a penetration rate of 40%. (Comparison: the average in the global market is 24%.)
 
Fog- As front fog lamps serve a certain purpose and need to provide a sharp lighting, their thermal and optical designs are the second hardest following those of high and low beam lamps. Therefore, the LED penetration rate in the front fog lamp market in 2017 only marks a percentage of 7%. (Comparison: the average in the global market is 16%.)
 
LED Penetration Rate in New Energy Passenger Car Market
 
Regarding to electric vehicles (EV), most of their tail lights have been designed in uniform lighting effect. To create aesthetic visual effects, more and more LEDs are necessary. Thus, LED penetration rate in EVs' tail light segment has stayed higher than that in general gas vehicle. Take the year 2017 as an example, LED penetration rate in EVs' tail light segment reached 75% while that in conventional passenger vehicles' came to 44%.
 
High / Low beam as the major vehicle lighting requires LED power to reach about 15 watts, or requires a 40~60-watt conventional lamp. The difference of light source energy consumption between the two types is huge from the perspective of EVs. Therefore, EV industry accelerates its adoption of LED high/low beam, and LED penetration in high/low beam segment will rapidly grow in a short run. LED penetration rate in high/low beam segment arrives at 8% while that rate merely approaches 2% in the conventional vehicle segment in China in 2017.
 
Chinese Automotive Lamp Manufacturers
 
Joint-venture and Chinese local auto lamp are in the Chinese market. The largest joint-venture automotive lamp manufacturer is Shanghai Koito, which is the joint venture between Japan Koito and Huayu Automotive Systems. Shanghai Koito has a revenue of more than RMB 10 billion. Xingyu is the largest local automotive lamp manufacturer with the revenue of RMB 2.5 billion in 2015. In addition, the main joint venture and foreign auto lamp manufacturers in Chinese market also contain Hella, Koito, Valeo, Magneti Marelli and Varroc TYC. The local OE lamp manufacturers include Jiangsu Tong Ming, Jiangsu Wenguang, Zhejiang Jiali, Zhejiang Tianchong, Forda Signal, Ludebei and Liaowang.
 
Chinese Automotive Module Manufacturers
Chinese auto lamp module brands with high visibility and universality are Sunlight and Laster. Most foreign-funded and joint-venture auto lamp manufacturers cover module business. Xingyu and Tong Ming are the few Chinese manufacturers extending the business scope to module. But because the entry barrier of module production is not high, many other Chinese lamp manufacturers also plan to invest the module production line. It is expected that the proportion of Chinese auto lamp manufacturers with self-production module will substantially increase in the future.
 
LED Manufacturers in the Chinese Market in 2015-2016
 
According to LEDinside’s survey, the top five in Chinese automotive LED revenue in 2015 is OSRAM Opto, Lumileds, Seoul Semi, Nichia, and Everlight. However, Samsung took aggressive attitude toward automotive LED business in 2016, has entered top five in 2016, while Everlight ranked sixth.

2017 Chinese Automotive Lighting Market Report
 
Release: 31 May 2017
Language:  Chinese / English
Format:  PDF
Page:  171
 
Chapter I 2017 Chinese Automotive LED Market Scale Analysis
  • 2017 Chinese Automotive Lighting Market Report- Definition
  • 2016-2020 Chinese Car Market- Conventional Passenger Car
  • 2016 Chinese Conventional Passenger Car Market- By Brands
  • 2017-2018 LED Penetration Rate- Exterior Lighting
  • 2017-2018 LED Penetration Rate- Interior Lighting
  • 2016-2020 Automotive LED Market Revenue- Exterior Lighting
  • 2016-2020 Automotive LED Market Revenue- Exterior Lighting- OE v.s. AM / PM Market
  • 2016-2020 Automotive LED Market Revenue- Interior Lighting
  • 2016-2020 Automotive LED Market Revenue- Interior Lighting- OE v.s. AM / PM Market
  • 2016-2020 Chinese Car Market- New Energy Passenger Car
  • 2016 Chinese New Energy Passenger Car Market- By Brands
  • 2017-2018 LED Penetration Rate- Exterior Lighting
  • 2017-2018 LED Penetration Rate- Interior Lighting
  • 2016-2020 Automotive LED Market Revenue- Exterior Lighting
  • 2016-2020 Automotive LED Market Revenue- Interior Lighting
 
Chapter II Automotive Lighting Design and Trend Analysis
  • Part I Automotive Exterior Lighting Design and Trend Analysis
    • High/ Low Beam
    • Fog Light
    • DRL
    • RCL
  • Part II Automotive Interior Lighting Design and Trend Analysis
    • Automotive Panel
    • Rear View Mirror
    • Side View Mirror
  • Part III  Infrared LED / Infrared Laser / Optical  Sensor
    • 3.1 Infrared Products Overview in Automotive Market
    • 3.2 Advanced Driver Assistance Systems Market
    • 3.3 Driver Monitoring and Warning System
    • 3.4 Optical Sensor
 
Chapter III Policy and Industry Regulation
  • Chinese Automotive Original Equipment Market Requirements
  • Chinese Automotive Original Equipment Market Standards
  • Chinese Automotive Aftermarket Demand- Two U.S. Certification Organizations Enter the Chinese Market
  • Chinese Auto Lamp Regulations and Standards Overview
  • Chinese Auto Lamp Certification Requirements
  • Auto Lamp Market Optical Regulations and Characteristics- High / Low Beams, Front Fog Lamps, RCL
  • Auto Lamp Market Optical Regulations and Characteristics Low Beam Covers Brightness and Light Shape Requirements
 
Chapter IV Chinese Automotive Lighting Supply Chain Analysis
  • Top Ten Automobile Manufacturers Supply Chain- Joint Venture Manufacturers
  • Top Ten Automobile Manufacturers Supply Chain- Wholly-Owned Manufacturers
  • Automobile Supply Chain- From Perspective of Module Manufacturers
 
Chapter V Automotive Module and Lamp Players
24 Module or Lamp Players
  • Revenues (Global or China) in 2015
  • Revenue By Region
  • Production Site
  • Main Lamp Products
  • Market Distribution
  • Business Model
  • Key Customers
 
Chapter VI Chinese Automotive LED Manufacturer Movement
13 LED Manufacturers
  • Global and China Automotive Revenue in 2015 / 2016 (F)
  • Chinese Market Development Strategies
  • Automotive LED Product Specifications

 

If you would like to know more details, please contact:

 
Joanne Wu (Taipei)
joannewu@trendforce.com
+886-2-8978-6488 ext. 912
Disclaimers of Warranties
1. The website does not warrant the following:
1.1 The services from the website meets your requirement;
1.2 The accuracy, completeness, or timeliness of the service;
1.3 The accuracy, reliability of conclusions drawn from using the service;
1.4 The accuracy, completeness, or timeliness, or security of any information that you download from the website
2. The services provided by the website is intended for your reference only. The website shall be not be responsible for investment decisions, damages, or other losses resulting from use of the website or the information contained therein<
Proprietary Rights
You may not reproduce, modify, create derivative works from, display, perform, publish, distribute, disseminate, broadcast or circulate to any third party, any materials contained on the services without the express prior written consent of the website or its legal owner.

Violumas, provider of high-power UV LED solutions and inventor of 3-PAD LED technology, is proud to launch the release of new 275nm and 265nm LEDs in mid-power, high-power, and high-density packages. The radiant flux of the new 275nm and 265nm... READ MORE

DURHAM, NC – November 12, 2024 –– Cree LED, a Penguin Solutions brand (Nasdaq: PENG), today announced the launch of its new CV28D LEDs with FusionBeam™ Technology, a groundbreaking advancement for the LED signage market... READ MORE