Reportedly, Apple's iPad 5 will be up to 33% lighter than its predecessor. The tablet is rumoured to be going into production in July ahead of a September launch, with the Cupertino firm shedding a third of the iPad 4's weight for its latest model. The next generation iPad will keep its 2048 x 1536 Retina display by using a thinner 0.2mm piece of glass. Just one LED light bar will apparently be used for backlighting - the iPad 4 currently uses a 0.25mm glass substrate and two LED light bars. Supply chain sources in Taiwan told DigiTimes that the bezel ...

As June is dawning near, LEDinside is ready to hold a grand and perfect LEDforum 2013 Guangzhou at the Chinese Export Commodities Fair Pazhou Complex, Area B, Room # 8.   LED industry has undergone big changes. Based on the potential market demands, many companies have mushroomed all over the world in recent years. However, an oversupply comes after the large capacity expansion. What’s worse, due to credit crisis, LED development in European market has slowed down. And it also has influenced Asian LED manufacturers which rely on the external ...

According to new research by Wageningen UR Greenhouse Horticulture in collaboration with Philips, exposing tomatoes to extra light from LED lamps during the growing process boosts the fruit’s nutritional value by nearly doubling the amount of vitamin C. The partnership will be continued in a joint facility for research into the application of LED lamps in horticulture (IDC LED) that will open May 16 in Bleiswijk. Scientists at Wageningen UR studied several tomato varieties and various intensities of light. They used special LED modules that were sus...

Recently, a new research has claimed that the so-called ecofriendly LED lights may cause permanent damage to your eyes. The study found that exposure to LED lights can cause irreparable harm to the retina of the human eye. According to Think-Spain.com, once the retina cells are destroyed by prolonged and continuous exposure to LED rays, they cannot be replaced and will not regrow. Researchers said this is caused by the high levels of radiation in the 'blue band' , and is likely to become a global epidemic in the medium term given that computer, mobiles and TV s...

Valence Process Equipment, Inc. (VPE) has announced the commercial release of the VPE GaN-500 MOCVD system, a new metal organic chemical vapor deposition (MOCVD) system for production of high-brightness light emitting diodes (LEDs). The VPE system includes a reactor that is designed around a novel (patent pending) chamber and gas-injector, resulting in the highly efficient use of pre-cursor gases. The system has a capacity of 59 two-inch wafers with a future upgrade path to 72 two-inch or 20 four-inch wafers. Frank Campanale, CEO of VPE, commented: ...

Philips Hue LED light bulb Philips’ intelligent LED light bulb named Hue has just been given an update. Now, Hue users can tie their bulbs to the IFTTT service which turns a user’s Internet service into an actionable equation. The new Hue update also adds geofencing support, programmable alarms and timers, turning the LED bulb into just as much a notification system as it as a source of light. This update comes a little more than two months after Philips opened up the API to allow developers to write their own apps for the colorful bulb. "P...

Philips announces a number of innovations making Philips Hue - the world’s smartest connected LED lighting system – even more intelligent, convenient and accessible to homes across the world. These updates reflect valued feedback from the growing community of Hue enthusiasts and developers worldwide.   Now connected light can keep you up-to-date The next generation of the Hue app (version 1.1) can now hook up to your essential internet services via your smartphone or tablet, meaning your bulbs can act as indicators for weather, stock quotes, sports scores, emai...

Building upon the success of the CR Series downlights, Cree, Inc. introduces Cree  Full Definition CR4™ and CR6™ downlights – the ideal luminaire to replace outdated incandescent four- and six-inch recessed downlights. Featuring a warm-white 2700K color temperature, dimming and better than 80 CRI, the Full Definition downlights are ideal for applications that require good light quality and low initial cost. "Cree is committed to delivering customers the LED lighting solution needed to fit their budgets and applications," said Greg M...

While conventional LED materials enabled the start-up and initial development of the industry, higher performing products such as silicones can help solid-state lighting meet more challenging performance requirements for fast-growing applications like streetlights, office illumination and architectural lighting. "Dow Corning’s global lighting customers are concerned that emerging LED applications are quickly pushing conventional LED materials – such as glass, epoxies and plastics – to their practical limits," said Eric Peeters, vice president of D...

Dual-colour lasers could pave way for more energy efficient LED lighting Researchers in the US have come up with a new semiconductor device that is capable of emitting two distinct colours and could potentially open up the possibility of using LEDs universally for cheap and efficient lighting. To create the proof-of-concept device, the researchers, who hail from Arizona State University, used nano-scale materials and processes to emit green and red light separated by a wavelength of 97 nanometres. Their findings have been published in the scientific journal Semiconduct...

E-Switch’s LP6 Series Pushbutton Switch E-Switch announces an RGB color option for the LP6 series LED illuminated pushbutton switch. You can order this switch with either SPST or DPST circuit options and it is a momentary switch. It offers a 15mm square sculptured cap with LED color options that now include RGB. The applications and markets for this switch include consumer electronics, medical devices, audio/visual, instrumentation, vending machines, kiosks and more. Specifications for the LP6 series illuminated pushbutton switch include: ...

After the launch of LDD-H/HW and LDD-L/LW series, MEAN WELL further announced two kinds of DC-DC Buck converter with constant current output for LED driving purpose ~ LDD-HS and LDD-LS series. With SMD package, they are suitable to be mounted by surface mounted-process (SMT) on the system PCB of lighting fixture and save the labor cost of installation. LDD-HS features with 9~56VDC input and 2~52VDC output range while LDD-LS possesses range of 9~32VDC input and 2~28VDC output. Both series provide multiple output curren...

Manchester, United Kingdom, - For people looking for money saving smart lighting solution, Gigateq Ltd, a leading electronic manufacturer and retailer from Manchester has come up with their innovative smartphone controlled LED light bulb that consumes lesser electricity than conventional lighting solutions. The new light bulb is called Easybulb and is guaranteed to last up till 25 years. Gigateq Ltd is the biggest independent manufacturer & online retailer of Easybulb that offers a range of products which could be controlled by smartphone & mobile devices. "O...

Osram reports that it will shut down its production site in Tangerang, Indonesia, by the end of December 2013 at the latest. In Tangerang, Osram manufactures traditional products, mainly incandescent lamps, with some 1,100 employees. The move is part of the company’s reorganization program initiated in 2012 and targets cumulative gross savings of about 1 billion euros by 2015. The products manufactured in Tangerang are sold both in Asia and worldwide. However regulations and technological change in the lighting industry are leading to the incandescent lamp disappearing fr...

THE Chinese Academy of Science reports that researchers in China have used strain engineering to improve the light output power of 530nm green light-emitting diodes (LEDs) by 28.9% at 150mA current injection [Hongjian Li et al, Appl. Phys. Express, vol6, p052102, 2013]. The research was carried out by Chinese Academy of Sciences’ Institute of Semiconductors, Beijing, and University of Hong Kong. Schematic of epitaxial material for conventional and shallow quantum well (SQW) LEDs (Figure 1). Light output power–current–voltage (L&ndas...

CPY250 Cree reports a breakthrough innovation in canopy LED lighting with the introduction of the CPY250 canopy and soffit lighting series. According to Cree it Consumes 75 percent less energy than the MH (metal halide) systems it’s designed to replace and 5–15 percent less energy with more than 35 percent increased performance compared to competing higher-cost LED luminaires, the new CPY Series delivers exceptional visual environments across a range of canopy applications, including gas stations, bank drive-through ATMs and hotel/airport drop-off ...

Nano Labs Corp. (CTLE) announced the Company has signed a Non-Disclosure Agreement (NDA) with CIVIK of Mexico. The NDA will allow CIVIK to review and test two of Nano Labs' nanotechnologies, the nano insulate coatings and nano diamond applications, on CIVIK's proprietary LED light system. The two nanotechnology applications being tested are as follows: 1. Employing Nano Labs' nano insulate coating, NC2012, which may allow the LED light to dissipate heat created in the LED housing thereby increasing the efficiency and life of ...

LiquidLEDs Lighting Corp., a manufacturer and distributor of LED lighting devices in Australia and New Zealand, now offers a unique Silver Crown LED lamp the company claims is the only LED lighting product of its kind designed to look exactly like an incandescent light bulb. Designed primarily for decorative and general-purpose lighting, the 5-Watt Silver Crown LED Light Bulb by LiquidLEDs is a replacement to 40-watt incandescent light bulbs, offering up to 90 percent in energy savings. The LiquidLEDs Silver Crown LED demonstrates a high-qualit...

LED industry has undergone big changes. Based on the potential market demands, many companies have mushroomed all over the world in recent years. However, an oversupply comes after the large capacity expansion. What’s worse, due to credit crisis, LED development in European market has slowed down. And it also has influenced Asian LED manufacturers which rely on the external market. As a result, partial manufacturers have seen a slowing increase in their revenues. Despite the troubles, governments still sustainably promote LED lighting. The latest market report p...

Philips Lumileds' new LUXEON 3535 2D has the highest efficiency in its class LUXEON 3535 2D, which combines two LED chips in a package to enable reduction in LED count and cost of designing retrofit lamps, consumer downlights and diffuse industrial lamps. Best-in-class efficacy of 140 lm/W is achieved for cool white light at 4000K and minimum 80 CRI. “This is an exciting breakthrough, because lighting designers can take advantage of a high lumen package with high efficacy while using significantly fewer chips per fixture,” said Rahul Bamm...

LUXEON Z ES Philips announces newest high-power emitter, the LUXEON Z ES, offers industry leading color consistency through a 1-step MacAdam ellipse in warm white color options.  With a micro-footprint, undomed design and full spectrum availability, LUXEON Z ES from Philips Lumileds enables high lumen density solutions with precise optical control. In applications such as retail, where superior beam angles and high efficacy are crucial, the illumination-grade emitters help lower costs while offering best in class white light. LUXEON Z ES...

Everlight's 5630 mid power LED offers Excellent cost-to-performance ratio due to high package manufacturing capacity Everlight's 62-217D is a standard 5630 package in a 0.5W (150mA) version for 40/60W bulb retrofits and a 0.2W (60mA) version that is suited for light bars. Both white top-view LEDs are compact and ultra-thin (5.6*3.0*0.65 mm LxWxH) and available across a complete ANSI CCT range of 2700K (warm white) to 6500K (cool white). These mid-power LEDs offer a CRI of min. 80Ra and a lumens output of 50lm (WW) and 55lm (CW). The cool...

After a year of research and development, Klauf Lighting of Lewes, Deleware has introduced the Klauf light bar. Uniquely, the light bar takes advantage of remote phosphor technology. The warm white light is also leverages better dimming technology that is compatible with standard inexpensive dimmers. The luminaire has an extruded aluminum housing and a yellow-orange diffuser, which gives the Klauf light bar a distinctive appearance. Unlike conventional LED lighting that uses blue LEDs packaged with a phosphor coating to produce white light, a long phosphor material laye...

Access Fixtures has expanded its LED Retrofit product line to include Post-Top LED Retrofit Lamps for acorn type globes used on decorative and antique street lights.  Post-top LED retrofit LED lamp replaces 70w to 175w HID lamps while delivering superior light quality. The lamps are easy to install, have as much as 6 times the life of the lamps they replace and reduce energy use by as much as 75%. They are ideal for existing antique style and decorative street lights used across the USA on main streets, shopping centers, hotels, apartment complexes, and unive...

Jinwill lighting has announced the release of a powerful LED flood light that provides a versatile and powerful source of illumination that can be mounted to any metallic surface that will accept a magnet. The LED work light features a rugged three leg pedestal base constructed from aluminum, magnetic mounting, and a high output LED lamp, making it ideal for operators who need a versatile lighting system that can be mounted almost anywhere. The LED work light from Jinwill lighting produces 5,556 lumens of brilliant light output from a single LED lamp and features a three...

Global electronic components distributor Digi-Key Corporation, the industry leader in electronic component selection, availability and delivery, announced the addition of single stage LED drivers from Cirrus Logic, Inc. The innovative CS615/16 product line recreates the dimming performance consumers expect from incandescent light bulbs. “We’re seeing significant growth opportunities in the lighting market,” said Mark Zack, Vice President, Global Semiconductor Product at Digi-Key. “Cirrus Logic’s new single-stage LED drivers are a gr...

U.S. Army researchers are reaching out to industry to find companies able to provide or develop a driver for LEDs that significantly improves the turn-on (rise time) and turn-off (fall time) of a pulsed-illumination system. The U.S. Army Contracting Command has issued a sources-sought notice (W911QY-13-R-0075) for the Development Of Circuitry For Improved Led Turn-On And Turn-Off program, which seeks to determine if significant improvements over an existing LED driver system are possible. The notice was released on behalf of the Army Natick Soldier System...

A new semiconductor device capable of emitting two distinct colours has been created by a group of researchers in the US, potentially opening up the possibility of using LEDs universally for cheap and efficient lighting. The proof-of-concept device, which has been presented today, 3 May, in IOP Publishing's journal Semiconductor Science and Technology, takes advantage of the latest nano-scale materials and processes to emit green and red light separated by a wavelength of 97 nanometres—a significantly larger bandwidth than a traditional semiconductor. Furthermor...

Traditionally Gallium Nitride (GaN) LED devices are produced on either sapphire or silicon carbide (SiC) substrates, due to the good crystal lattice matching between the materials and the GaN, with typically 2” or 4” diameter material being used. Significant effort is being made to grow GaN on ubiquitous larger diameter (6” or greater) silicon wafers, a substrate that offers significant substrate cost reduction, together with the ability to process in automated IC production lines. Reasonable estimates are that potential savings on the order of 80% over tr...

Arkema has commercialised a grade of acrylic resin that is better suited to handle modern LED lighting. Arkema – based in Colombes, France, with U.S. headquarters in Philadelphia — began making Plexiglas Diffuse-brand resins in March at its plant in Bristol, Pa. Production of the materials at an Arkema plant in Rho, Italy, will begin in May. The material can diffuse light in LED applications without compromising overall light transmission, officials said. Typical applications for Diffuse-brand resins include architectural and indoor commercial lighti...