2009-03-19
2009 China Energy Saving and Environmental Products & Technology Expo will be on Sep 10 - 12, 2009 in Suzhou.
Continue reading →
2009-03-19
Green energy technology was named the top development priority by Taiwan President Ma Ying-jeou on Wednesday, with Solar and LED technologies highlighted as two areas where the island has potential to lead.
Green energy technologies have become a popular target. Governments of U.S., Germany and Japan all have listed clean environment technologies as key development fields and have invested to promote the energy saving devices including solar panels.
Continue reading →
2009-03-19
Castrade Co. Ltd. in Japanese will release its ultra compact LED projector "CV-MP02” on March 19, 2009.
The two major differences between CV-MP02 and the ultra compact projectors on the market are its low price and that it’s intended for automobile use. As an automotive device distributor, Castrade has planned to take advantage of its expertise in automotive audio-visual equipment and monitors to market the CV-MP02. Dedicated accessories will also be released to promote its use in vehicles.
Continue reading →
2009-03-19
Avago Technologies(San Jose, California USA), a leading supplier of analog interface components, has just announced its first 3-Watt (3W) Moonstone™ tricolor red, green and blue (RGB) LEDs. This new product can be used widely in solid-state architectural and commercial lighting applications.
Continue reading →
2009-03-19
Prototypes of a new type of white light LEDs will be brought out in about four months by Cyberlux, a specialized provider of light emitting diodes (LEDs). The product cost of this new type will be cut substantially than conventional LEDs and more light will be emitted.
Continue reading →
2009-03-18
The following is a Tunto LED desk lamp, which is designed by Tunto owner and founder Mikko Kärkkäinen and is also the winner of Red Dot Design Award 2009.
This stylish LED desk lamp is made of warped oak or walnut and activated solely by touch, so it is free of any switches. So, all it needs is a gentle touch! The innovative LED lamp is truly a masterpiece combining digital technology and wood into a seamless design. The wooden lamp sells for $640.
Continue reading →
2009-03-18
It’s reported that Vienna, the capital of Austria installed LED streetlights from LEDworx. LEDworx®, 2 LED-Streetlights Hawk Eye [3.0] were installed at Kühnplatz in 1040 Vienna. The spirit of innovation and the commitment to energy efficiency and LED-Technology of all parties concerned enabled this first test installation. Further installations will follow in 2009.
Continue reading →
2009-03-18
It’s reported that Molex Incorporated has added fully-automated LED bonding capabilities in China. Molex also bonded its 500,000,000th LED on a membrane switch using the latest high-speed SMT processes and bonding technology.
Molex has been applying LEDs to flex circuits for over 20 years through two innovative methods to bond and encapsulate the components for robust electrical and mechanical reliability, providing customers with a low-cost interactive user interface.
Continue reading →
2009-03-18
According to industry research institute LEDinside, the January 2009 total revenue of Taiwan upstream LED manufacturers is 2.743 billion NTD. With the lunar New Year influencing the total working days of the month, the revenue of January went on its dropping comparing with December, 2008 (MoM -15.9%,YoY -52.6%).
Continue reading →
2009-03-18
GE Lighting won the Lighting Design Awards for its Vio high power white LEDs in the Light Sources and Controls category, sponsored by Ex-Or. GE Lighting’s Vio high power white LEDs won the award for what judges described as a "major advance in color stability".
Continue reading →
2009-03-18
Aqualite Co. Ltd., a company based in Wuhan, China, has purchased three Close Coupled Showerhead (CCS) CRIUS MOCVD systems from AIXTRON AG, worldwide leading provider of deposition equipment to the semiconductor industry. It’s disclosed that the three CCS CRIUS systems were delivered in the 31x2 inch wafer configuration in the third and fourth quarter of 2008. Aqualite intends to utilize these reactors for the development and production of blue, green and white LED chips.
Continue reading →
2009-03-18
The thermal resistance of a material is its resistance against thermal conduction. The unit of thermal resistance is degree per watt, representing the temperature difference across a structure when a unit of heat energy flows through it in a unit time. After the LED is lighted and the thermal conduction stabled, as every watt of power on the chip surface being consumed, the temperature difference between the PN junction and the linking bracket or heating panel is the thermal resistance value of the LED.
Continue reading →
2009-03-18
Silicon carbide is also called "emery powder" or "refractory sand." The usual manufacturing process of SiC is to combine silica sand, tar (or coke), woodchip (and salt when manufacturing green SiC) and other materials in an electric resistance furnace at a high temperature. Silicon carbide is usually divided into two categories, the black SiC and the green SiC, both having a hexagonal crystal structure, a density of 3.2 -3.25g/cm³ and microhardness of 2840-3320kg/mm2.
Continue reading →
2009-03-17
With amazingly high contrast ratios and a thickness measuring in the millimeters, OLED TVs certainly look like the future of home theater. However, price is a major hurdle for the technology to overcome. While new technology always comes with a heavy price tag, some are expecting the price of OLED lighting to come down some time in 2011. The recent report predicts that active OLED lighting will become the mainstream in 2011, and its revenue will surpass that of passive LED lighting sometime around 2018.
Continue reading →
2009-03-17
California Micro Devices (CMD) has unveiled LuxGuard family of protection devices for ultra high brightness (UHB) LED lighting applications. The LuxGuard family of protection solutions includes both LED submounts that deliver robust ESD protection and enhanced thermal management capabilities and side mounts which offer superior ESD protection for customers that utilize ceramic submounts.
Continue reading →
2009-03-17
Kinetic Lighting is reportedly to be one of the first lighting companies to offer the new ColorReach (TM) Powercore for rent in Southern California. The LED flood fixture, one of Philips Color Kinetics’ newest and most powerful LED fixtures, outputs more than 5,000 lumens, projects light up to 500 feet and only consumes 290 watts at full intensity. The company says it is an incredibly bright floodlight suited for both indoor and outdoor use.
Continue reading →
2009-03-17
It’s reported that Cooper Industries has acquired Illumination Management Solutions, Inc. (IMS) of Irvine, California that specializes in optics and system design for LED fixtures. Cooper did not reveal the purchase price or other details.
Optics are critical to improving the energy efficiency of LED fixtures and creating lighting patterns that improve safety and customer comfort, according to Ron Holder, IMS president.
Continue reading →
2009-03-17
Recently, LED giant Cree, Inc. has launched the Product Characterization Tool (PCT), an interactive LED design tool that simplifies the task of translating nominal LED performance to real-world conditions. The online tool, accessible via cree’s website, Cree notes PCT allows users to easily characterize any XLamp® LED over a wide range of operating conditions, including drive current, flux bin, price and junction temperature. It also calculates metrics such as lumen output, lumens per watt, lumens per dollar and more.
Continue reading →
2009-03-16
Bright Green Technology introduces an LED backlight system - Bright Green Matrix™. The company says it is designed to illuminate large format signs and billboards in retail, commercial and advertising environments and it is equally suited to retrofitting into existing boxes or incorporating into new designs.
Continue reading →
2009-03-16
Thanks to the success of its LED landscape products, Kichler has added 26 new products including 12 LED path and spread lights, four well lights, three accent lights and new long LED cowls to its popular Design Pro LED landscape offerings. Kichler now offers homeowners a complete line of energy-saving LED products that all offer a bright, white, even flow of light.
Continue reading →
2009-03-16
The researchers at Rensselaer Polytechnic Institute in New York of the US announced the development of a new type of blue LED in collaboration with Samsung Electro-Mechanics. The researches said the blue LED that improves light output by 18%, and the amount of electricity the LED converts into light by 22%.
Continue reading →
2009-03-16
It’s reported that The Schenectady Museum & Suits-Bueche Planetarium has added new LED bulbs from Marktech LED Lighting of Lathem, New York in the Museum's Broughton Gallery. In order to improve its energy consumption and to enhance the appearance of exhibits in the gallery the Museum has installed fifty new 12W LED Bulbs. The new solid-state PAR30 LED Bulbs were used to replace outdated incandescent track lighting that had been previously used to light the section of the Museum.
Continue reading →
2009-03-16
Recently, the Federal Aviation Administration (FAA) issued a safety alert for operators (SAFO) called “Night Vision Goggle (NVG) Advisory Pertaining to Certain Red Color LEDs.” This SAFO advises operators using NVGs that certain LED lighting systems fall outside the combined visible and near-infrared spectrum of NVGs, and thus will not be visible to them.
Continue reading →
2009-03-13
As environmental protection becomes an issue of increasing concern, energy-saving policies have been brought forward continually by Chinese government. According to LEDinside, the LED industry may benefit from the RMB 4 trillion economy stimulus funds planned to be devoted before the end of 2010. And the EXPO 2010 in Shanghai will also bring out another LED demand high tide after the Beijing Olympic Games 2008.
Continue reading →
2009-03-13
The OLED lighting market will reach $6 billion by 2018, according to a recent report. The report notes that the OLED market will start to pick up in 2011, with Philips, GE, Konica Minolta, Lumiotec, and OSRAM entering mass production.
Continue reading →
2009-03-13
ANC Sports Enterprises released new versions of two of the company's state-of-the-art software applications, the Data Interface Solution (DIS) and VisionSOFT 3D interface.
The Wachovia Center, home to the Philadelphia 76ers and Flyers is the first venue to feature DIS 3.0 and VisionSOFT 6.5. The newest features of ANC’s revolutionary platforms include animated statistical imagery, automated font resizing, and an immediate, seamless transition to a backup server function.
Continue reading →
2009-03-13
LED lamps were compared to other technologies in a recent issue of National Geographic magazine, and LED lighting was also discussed in the House of Commons, the UK’s legislative chamber, on March 5 as part of a debate on energy and climate change.
Joan Ruddock, Under-Secretary of State for Energy and Climate Change, was asked if there had been discussions between her department and the Department of Environment, Food and Rural Affairs (DEFRA) on the effect on electricity consumption and CO2 emissions of the installation and use of LED lighting.
Continue reading →
2009-03-13
AIXTRON AG of Aachen, Germany, worldwide leading provider of deposition equipment to the semiconductor industry, announced financial results for fiscal year 2008, ended December 31, 2008.
Key Financials
Continue reading →
2009-03-13
Recently, Advanced LEDs Ltd of UK announced that it has completed two LED projects in Dubai. The projects include the Dubai Mall, with more than 1,200 stores, and the 360m-high Burj Dubai Lake Tower Hotel next door.
Continue reading →
2009-03-13
It’s reported that Samsung Group's LED business unit will begin operation in June with an initial target production of 120,000 LED panels. However, Samsung indicated that this production target is not big enough to challenge leading foreign makers in terms of market share. They expect the production capacity will be tripled by 2010.
Continue reading →